Carbon fiber spokes have higher stiffness and higher tensile strength, and the lateral response is 7% higher than that of the same steel spokes, and the high frequency vibration absorption capacity of carbon spokes is stronger than that of steel spokes. It can provide better aerodynamics and excellent stability, allowing you to have an advantage in full sprint and high-power climbing.
Both front and rear hubs use S&S ceramic bearings,ceramic bearings further increase hub rolling efficiency with lower rolling resistance.At the same time, the non-driving side of the front and rear hubs have bearing pre-tightening side covers.
The front and rear hubs use 6902 bearings. The larger the bearing, the better the rigidity. On the premise of ensuring the performance output of the hub, we try to reduce the weight on the hub body and minimize the rolling resistance.
The disc brake hub uses 21 spokes on the front wheel, 14 spokes on the drive side, and 7 spokes on the non-drive side. The rear hub has 24 spokes, 16 on the drive side and 8 on the non-drive side.
After 6 months of continuous design and continuous improvement, we have found the best geometric angle of the hub so that the spoke tension on the driving side is the same as the tension on the non-driving spoke side, which is very important. In this way, the stability of the wheels can be improved to a greater extent when entering a curve quickly.
All PE wheel series are tubeless compatible, if you want to use tubeless tire, we will be equipped with tubeless rim tape and tubeless valve.
|SERIES||DISC PE50||FRONT SPOKE PATTERN||Radial|
|RIM TYPE||Tubeless compatible||REAR SPOKE PATTERN||Radial|
|RIM WIDTH||50mm||SPOKE COUNT||21F/24R|
|INNER WIDTH||21mm||SPOKE TYPE||CS-01|
|OUTERWIDTH||28mm||NIPPLE TYPE||Alloy secure lock|
|FRONT HUB||12*100 ceramic bearing||ASSEMBLY METHOD||Handbuilt|
|REAR HUB||12*142 ceramic bearing||EXTRAS||Spokes,nipples|
|BRAKE INTERFACE||Center lock||WEIGHT||F.580g R.720g|
|HUB TYPE||YAn RD28 center lock||SYSTEM WEIGHT LIMIT||275lbs / 125kg|
|CASSETTE BODY||SHIMANO&XDR||RECOMMENDED TYRE SIZES||25 to 43mm|